Flanged Cam Followers
Flat Flanged Cam Followers and Track Rollers 2 results found that include 36 products Cam followers and track rollers from Grainger can withstand a variety of mechanical applications. Choose from assorted cam follower types, including full complement needle rollers, stud, heavy stud, crowned and yoke.
The integral flange (stud head) and the pressed-on flange ring enable cam followers to accommodate axial loads that can occur because of skew or tilting. Long service life The crowned outer ring running surface is beneficial for applications where outer ring tilting relative to the track may occur or where edge stresses need to be minimized.
- PCI Procal Inc. FTR-2.00-9 Flanged Cam Followers
- Four-Bolt Flange
- 208
- PCI Procal Inc. CIR-4.00 Flanged Cam Followers
- 1250 kN
- 280 mm
- PCI Procal Inc. FTR-4.00 Flanged Cam Followers
- 0.866 in
- 3.5469 in
- McGill FCFE 3 1/2 Flanged Cam Followers
- 345000 N
- 100.000 mm
- McGill FCFE 3 1/4 Flanged Cam Followers
- 130 mm
- 8 Nm
- McGill FCFE 2 3/4 Flanged Cam Followers
- 54-1/2 in
- 36 in
- Smith MFCR-62 Flanged Cam Followers
- Open Ends with Full
- 31000 lbf
- Smith FCR-2-3/4-E Flanged Cam Followers
- Steel
- 0.78 lbs
- Smith FCR-3-1/4-E Flanged Cam Followers
- 17000 lbf
- 1.3750 in
- Smith MFCR-35 Flanged Cam Followers
- 3500 RPM
- Uncoated
- Smith FCR-1-3/4-E Flanged Cam Followers
- 46800 lb
- Cast Iron
- Osborn Load Runners FLRY-8 Flanged Cam Followers
- 1.4375 in
- Standard Duty